Technical parameters for engraving the touch! surface
Materials: touch! by Kahla cup
Colour: blue and green
Performance: 60%
Speed: 100%
Frequency: 25KHz
Passes: 3
Focus shift: 0
Air cooling: 0
Mode: Grid
Laser: CO2 40 watts
Resolution: 300DPI
Font: Betterlett
Duration: 747 Seconds
Hints:
Depending on the color you have to vary the performance. The brighter, the less power. DPI should not exceed 400, otherwise the laser stays in one place for too long and unsightly dark edges form.