Stainless Steel - Engraving of masonry trowels for laying the foundation stone

Especially for the ceremonial act of laying the foundation stone of a research center, we provided wall trowels with the appropriate lettering and logos.

We deliberately engraved the logo of the construction company less intensively, so that it only appeared on the trowel with about 50% of the color opacity, while the writing and the logo of the client were engraved with 100% opacity.

Overall, the trowel still needed almost 30 minutes for both passes.

Technical parameters for engraving stainless steel

TEXT
Material: stainless steel
Performance: 30%
Speed: 30%
Frequency: 25KHz
Passes: 1
Focus shift: 1
Air cooling: no
Mode: Grid
Laser: fiber 20W
Resolution: 3600DPI
Font: Helvetica
Duration 1198 seconds

LOGO
Material: stainless steel
Performance: 50%
Speed: 5%
Frequency: 114KHz
Passes: 1
Focus shift: 1
Air cooling: no
Mode: Grid
Laser: fiber 20W
Resolution: 1200DPI
Font: -
Duration 272 seconds

Notes: In order to make an engraving on stainless steel stand out in color, you have to find the right frequency with which to temper the surface so that it changes color to the desired color.