Cardboard engraving technical parameters
Material: cardboard 400g
Performance: 10%
Speed: 30%
Frequency: 25KHz
Passes: 1
Focus shift: 0
Air cooling: yes
Mode: Vector
Laser: CO2 40W
Resolution: 500DPI
Font: -
Duration 3480 seconds
Hints:
The more lines, the longer the engraving takes. Architectural programs like to lay out each line individually, causing the laser to jump from line to line. It is more intelligent to create geometric shapes, which in the best case are also arranged in layers one behind the other in such a way that no large distances have to be traveled in between.