Technical parameters of engraving a thermal jug with a silicone coating
Material: Culinario Tea Bottle (thermo pot)
Performance: 60%
Speed: 80%
Frequency: 25KHz
Passes: 1
Focus shift: 0
Air cooling: 0
Mode: Grid
Laser: CO2 40W
Resolution: 400DPI
Font: Helvetica Neue
Duration: 280 seconds
Hints:
The thermal jug is made of double-walled stainless steel, which has a thin silicone coating on the outside. Engraving with a CO2 laser removes the silicone layer and exposes the stainless steel surface underneath. It is important that the surface has a sufficiently good quality without scratches or discolouration.